for removing all insulation layers of cables with diameters from 25mm, cutting depth adjustable from 0-5 mm, replaceable double blade or turning blade, suitable...
Application range: Ø > 25 mm Insulation thickness: 0 - 5 mm Suggested application: PVC / Rubber Designed to strip outer sheath from MV and LV cables Longitudinal and circular cuts Designed to strip ends and or middle parts Stripping without hurting the lower layers Interchangeable two-sided blade Snap closure mechanism
for work under voltage 1000V, with the help of the adjusting screw the cutting depth of 0.5 - 5 mm insulation thickness can be adjusted. At the beginning of each longitudinal or round cut, the knife is guided by gently pressing the finger on the tab, the outer insulation is cut by small lever movements (> 90 °) and the…
area of application: Ø> 45 mm, insulation thickness: 0-5mm for insulation in PVC / PE / rubber and for stripping the outer sheath on large cable cross-sections (MS-HS), longitudinal and round cut, for removing the outer layer on GAS water pipes, for stripping of end and intermediate pieces, stripping process without damaging the layers underneath, replaceable blade, usable on both…
Application range: Ø 16 - 54 mm Insulation thickness: 0 - 5 mm Suggested application: Polyethylene / fully bonded Designed to strip aluminium armed outer sheaths of LV/MV Suitable for longitudinal and circular cutting Additional claw to break hard insulation The initial setting of the correct cable diameter is done by adjusting the handle The fixation of the device on…
Application range: Ø 16 - 54 mm Insulation thickness: 0 - 5 mm Suggested application: Polyethylene / fully bonded Designed to strip aluminium armed outer sheaths of LV/MV Suitable for longitudinal and circular cutting Additional claw to break hard insulation The initial setting of the correct cable diameter is done by adjusting the handle The fixation of the device on…
the cable knife AV3820 enables a precise, fast and safe stripping of all common round cables with a diameter between four and 28 millimeters. With the aid of an adjusting wheel in the housing, the cutting depth of the cutting blade can be infinitely adjusted. This prevents damage to the inner conductor. The cutting blade is self-rotating integrated in the…
Application range: Ø 16 - 54 mm Insulation thickness: 0,5 - 5 mm Suggested application: High density polyethylene Longitudinal and circular cuts on MV cables Used to work on live parts up to 1000V AC and 1500V DC Designed to strip ends or middle parts Hooked blade for removing the sheath that has been cut 100° tool rotation makes a…
Technical characteristics: Rigid single pole: 10 mm² Flexible single pole: 2,5 - 4 - 6 mm² 20 mm stripping depth Blade built into the tool The tool can be used with one hand only and allow easy stripping of cables lenghts of 20 mm The tool is provided with two hand - guards. Central handling permits all stripping operations Blades…
Application range: 6 - 150 mm² Insulation thickness: Preadjusted stripping inserts Suggested application: ABC cables (overhead, twisted, insulated) Designed to work on live parts up to 1000V AC and 1500V DC Stripping depth adjustment built inside the handle Insulated handle with bayonet connection Stripping length adjustable from 20 to 80 mm Scale marked on the built-in device to display the…
Technical characteristics: Application range: Ø 16 - 41 mm Insulation thickness: 0 - 2 mm Suggested application: Non vulcanized, peelable semiconductive layer To strip the non-vulcanized semiconductive layer of MV cables Longitudinal, helical and circular cuts Positioned on the cable comparable to a vice system Stop clamp to limit the stripping length Gradually depth adjustment Maximal rotating diameter 130 mm…
10 pieces, for spirally cutting inner insulation layers of the HV cables (MS-only 20 kV), handle with adjustable stripping length, the plastic case contains 9...
Technical characteristics: Application range: Ø 15 - 52 mm Insulation thickness: 0 - 15 mm Suggested application: Any type of primary insulation Designed to remove the primary insulation of 6 to 45kV cables Helical and circular cuts Max. rotating diameter 220 mm Snap knob to activate/deactivate axial feed Positioned on the cable like a vice system Designed to strip both…
Application range: Ø 24 - 60 mm Insulation thickness: 0 - 5 mm Suggested application: Polyethylene / lead cables Designed to strip outer sheath from MV and LV cables Circular and helical cuts Operates by simply rotating it around the cable axis Designed to strip both ends Interchangeable blade
Cable stripper AMS-MAXI without case Cable stripper IMS II FBS wire stripper UFS - tool for chamfered cuts of primary insulation Roller chains cutter 2x pressure spring RF5 Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Cable stripper AMS-MAXI without case Cable stripper IMS II UFS - tool for chamfered cuts of primary insulation HLS - cable stripper Stop clamp Roller chains cutter 2x pressure spring RF5 Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Equipped with: Cable stripper AMS-MAXI without case Cable stripper IMS II UFS - tool for chamfered cuts of primary insulation HLS - cable stripper Stop clamp Roller chains cutter 2x pressure spring RF5 Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
AIS - cable stripper Feed lever 14 pieces of 10 colored indication washers 2 spare screws to fasten the blade FBS - cable stripper IMS II - cable strippe Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
