High Voltage Creepage Extenders. HVCE creepage extenders represent a long-term solution to pollution flashovers by making a permanent addition to the creepage distance. This increases flashover voltage, reduces leakage currents and surface electrical stresses. They are available to fit insulators and bushings up to 500 kV, with shed diameter 80 mm to over 390 mm. Wrap-around HVCE-WA creepage extenders are…
Raychem RPG Electrical Insulating Gloves are safety gloves designed to protect workers from electric shock and arc-flash hazards while working on energized electrical equipment. They are made from high-quality insulating rubber and comply with international safety standards such as IEC 60903 and EN 60903.
Raychem Electrical Insulating Gloves are protective rubber gloves used by electrical workers to prevent electric shock while working on live equipment. They are made from natural rubber latex, providing high dielectric strength, flexibility, and durability. These gloves are available in different voltage classes (Class 00 to Class 4), offering protection from low voltage up to about 36 kV, depending on…
Raychem RPG Electrical Insulating Gloves are safety gloves designed to protect workers from electric shock and arc-flash hazards while working on energized electrical equipment. They are made from high-quality insulating rubber and comply with international safety standards such as IEC 60903 and EN 60903.
Raychem Electrical Insulating Mats are safety rubber mats designed to protect workers from electric shock while operating near live electrical equipment such as panels, switchboards, transformers, and substations. These mats are made from high-quality dielectric rubber with anti-skid surfaces and comply with IEC 61111 safety standards. They are flame retardant, resistant to oil and chemicals, and available in different voltage…
In Summary, Raychem Electrical Insulating Mats are safety rubber mats designed to protect workers from electric shock while operating near live electrical equipment such as panels, switchboards, transformers, and substations. These mats are made from high-quality dielectric rubber with anti-skid surfaces and comply with IEC 61111 safety standards. They are flame retardant, resistant to oil and chemicals, and available in…
Raychem Electrical Insulating Mats are safety rubber mats designed to protect workers from electric shock while operating near live electrical equipment such as panels, switchboards, transformers, and substations. These mats are made from high-quality dielectric rubber with anti-skid surfaces and comply with IEC 61111 safety standards. They are flame retardant, resistant to oil and chemicals, and available in different voltage…
Raychem Electrical Insulating Mat (DEA0020994) Electrical insulating safety mat for use near energized electrical equipment. Dimensions: 0.6 m (width) × 1 m (length) Thickness: 4.3 mm Color: Dark Grey Surface: Corrugated, glossy finish for improved grip and anti-slip performance. Suitable for AC and DC electrical applications. Commonly used in front of switchboards, control panels, substations, transformer rooms, and power distribution…
Heat-shrinkable busbar insulation tubing. Busbar heat-shrinkable tubing are suitable for use on long runs of rectangular or round busbars. The tubing shrinks down to 40% of their original diameter and, due to excellent flexibility, conform tightly to a wide range of sizes. BBIT/BPTM tubing can be slid easily into place, even around several bends and awkward shapes. The wall thickness…
Medium Voltage Insulating Boots. Cold applied unscreened elastomeric insulating boots (in Silicon or EPDM) are moulded parts, fitted over the connection between a cable lug and inline or right-angled equipment bushing, to improve phase-to-phase and phase-to-ground insulation. They are used in switchgear and transformer cable boxes where the air clearances are insufficient for normal operation or protect against flashover due…
Medium Voltage Insulating barriers. BCIC preformed covers provide connections for insulators, bushings and busbars. Customized covers can be made simply and economically by vacuum forming non-shrinkable sheet material. Installation is very simple often with no need to disconnect busbars. BCIC covers are held in place with UV-stabilized plastic nuts and bolts, rivets or tie-wraps, and can be easily removed for…
Medium Voltage Heat Shrink/ Fusion tapes. HVBT heat-shrinkable tape is ideal for use on complex shapes and where busbars cannot be disconnected. HVBT tape shrinks 30% longitudinally and an adhesive layer flows and seals the layers of tape during installation. As with the other components in the system, the adhesive does not bond to metalwork, allowing easy removal for inspection…
