Euro Series Cable Glands
Single compression metal cable glands for unarmoured cables with IP 68. Euro Series cable glands offer exceptional strain relief, a key requirement in electrical and instrumentation industries. Developed using twin-shot production technique, these glands represent an entirely new and smart design. Having a width of only 22mm, euro series cable glands are extremely compact and easy to use.
- Suitable for use in industrial (safe) areas with unarmoured cable
- Superior cable retention and strain relief
- Minimum temperature rating up to -50°C
- Maximum temperature up to +135°C
- Certified to IEC 62444 and EN 62444 and BS 6387:2013 Standards
- Wide cable range of cable glands
- Material – Brass/Nickel plated
Description
| SHORT THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| RESM-12 | M12 x 1.5 | 5 | 3.0-7.0 | 4 | 16 | 23-30 |
| RESM-16 | M16 x 1.5 | 5 | 4.5-10.0 | 4 | 20 | 26-34 |
| RESM-20 | M20 x 1.5 | 6 | 6.0-13.0 | 8 | 24 | 29-37 |
| RESM-25 | M25 x 1.5 | 7 | 9.0-16.0 | 10 | 29 | 33-42 |
| RESM-32 | M32 x 1.5 | 8 | 13.0-21.0 | 20 | 36 | 36-44 |
| RESM-40 | M40 x 1.5 | 8 | 16.0-28.0 | 20 | 46 | 44-55 |
| RESM-50 | M50 x 1.5 | 9 | 21.0-35.0 | 30 | 55 | 51-62 |
| RESM-63 | M63 x 1.5 | 10 | 34.0-48.0 | 40 | 68 | 56-67 |
| RESM-75 | M75 x 1.5 | 12 | 48.0-62.0 | 40 | 82 | 67-81 |
| LONG THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| RESM-12-L | M12 x 1.5 | 15 | 3.0-7.0 | 4 | 16 | 30-37 |
| RESM-16-L | M16 x 1.5 | 15 | 4.5-10.0 | 4 | 20 | 33-41 |
| RESM-20-L | M20 x 1.5 | 15 | 6.0-13.0 | 8 | 24 | 35-43 |
| RESM-25-L | M25 x 1.5 | 15 | 9.0-16.0 | 10 | 29 | 38-47 |
| RESM-32-L | M32 x 1.5 | 15 | 13.0-21.0 | 20 | 36 | 43-51 |
| RESM-40-L | M40 x 1.5 | 15 | 16.0-28.0 | 20 | 46 | 51-62 |
| RESM-50-L | M50 x 1.5 | 15 | 21.0-35.0 | 30 | 55 | 57-68 |
| RESM-63-L | M63 x 1.5 | 15 | 34.0-48.0 | 40 | 68 | 61-72 |
| PG THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| RESP-7-12 | PG7 | 5 | 3.0-7.0 | 4 | 16 | 23-30 |
| RESP-9-16 | PG9 | 5 | 4.5-10.0 | 4 | 20 | 26-34 |
| RESP-11-16 | PG11 | 6 | 4.5-10.0 | 4 | 22 | 27-35 |
| RESP-13.5-20 | PG13.5 | 6 | 6.0-13.0 | 8 | 24 | 28-36 |
| RESP-16-25 | PG16 | 6 | 9.0-16.0 | 10 | 29 | 32-41 |
| RESP-21-25 | PG21 | 7 | 9.0-16.0 | 20 | 36 | 33-42 |
| RESP-29-40 | PG29 | 8 | 16.0-28.0 | 20 | 46 | 44-55 |
| RESP-36-50 | PG36 | 9 | 21.0-35.0 | 30 | 55 | 51-62 |
| RESP-42-50 | PG 42 | 10 | 21.0-35.0 | 40 | 60 | 52-63 |
| RESP-48-63 | PG 48 | 10 | 34.0-48.0 | 40 | 68 | 56-67 |
| NPT THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| RESN-1/4 | NPT 1/4″ | 13 | 3.0-7.0 | 4 | 16 | 33-40 |
| RESN-3/8 | NPT 3/8″ | 13 | 4.5-10.0 | 4 | 20 | 35-42 |
| RESN-1/2 | NPT 1/2″ | 16 | 6.0-13.0 | 8 | 24 | 38-45 |
| RESN-3/4 | NPT 3/4″ | 16 | 9.0-16.0 | 10 | 29 | 40-48 |
| RESN-1 | NPT 1″ | 20 | 13.0-21.0 | 20 | 36 | 46-53 |
| RESN-1 ¼ | NPT 1 1/4″ | 20 | 16.0-28.0 | 20 | 46 | 50-58 |
| RESN-1 ½ | NPT 1 1/2″ | 20 | 21.0-35.0 | 30 | 55 | 51-62 |
| RESN-2 | NPT 2″ | 21 | 34.0-48.0 | 40 | 68 | 56-67 |
| EMC:
SHORT THREAD |
||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| REMC-12 | M12 x 1.5 | 5 | 3.0-7.0 | 4 | 16 | 23-30 |
| REMC-16 | M16 x 1.5 | 5 | 4.5-10.0 | 4 | 20 | 26-34 |
| REMC-20 | M20 x 1.5 | 6 | 6.0-13.0 | 8 | 24 | 29-37 |
| REMC-25 | M25 x 1.5 | 7 | 9.0-16.0 | 10 | 29 | 33-42 |
| REMC-32 | M32 x 1.5 | 8 | 13.0-21.0 | 20 | 36 | 36-44 |
| REMC-40 | M40 x 1.5 | 8 | 16.0-28.0 | 20 | 46 | 44-55 |
| REMC-50 | M50 x 1.5 | 9 | 21.0-35.0 | 30 | 55 | 51-62 |
| REMC-63 | M63 x 1.5 | 10 | 34.0-48.0 | 40 | 68 | 56-67 |
| REMC-75 | M75 x 1.5 | 12 | 48.0-62.0 | 40 | 82 | 67-81 |
| LONG THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| REMC-12-L | M12 x 1.5 | 12 | 3.0-7.0 | 4 | 16 | 30-37 |
| REMC-16-L | M16 x 1.5 | 12 | 4.5-10.0 | 4 | 20 | 33-41 |
| REMC-20-L | M20 x 1.5 | 12 | 6.0-13.0 | 8 | 24 | 35-43 |
| REMC-25-L | M25 x 1.5 | 12 | 9.0-16.0 | 10 | 29 | 38-47 |
| REMC-32-L | M32 x 1.5 | 15 | 13.0-21.0 | 20 | 36 | 43-51 |
| REMC-40-L | M40 x 1.5 | 15 | 16.0-28.0 | 20 | 46 | 51-62 |
| REMC-50-L | M50 x 1.5 | 15 | 21.0-35.0 | 30 | 55 | 57-68 |
| REMC-63-L | M63 x 1.5 | 15 | 34.0-48.0 | 40 | 68 | 61-72 |
| PG THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| REMCP-7-12 | PG7 | 5 | 3.0-7.0 | 4 | 16 | 23-30 |
| REMCP-9-16 | PG9 | 5 | 4.5-10.0 | 4 | 20 | 26-34 |
| REMCP-11-16 | PG11 | 6 | 4.5-10.0 | 4 | 22 | 27-35 |
| REMCP-13.5-20 | PG13.5 | 6 | 6.0-13.0 | 8 | 24 | 28-36 |
| REMCP-16-25 | PG16 | 6 | 9.0-16.0 | 10 | 29 | 32-41 |
| REMCP-21-25 | PG21 | 7 | 9.0-16.0 | 20 | 36 | 33-42 |
| REMCP-29-40 | PG29 | 8 | 16.0-28.0 | 20 | 46 | 44-55 |
| REMCP-36-50 | PG36 | 9 | 21.0-35.0 | 30 | 55 | 51-62 |
| REMCP-42-50 | PG 42 | 10 | 21.0-35.0 | 40 | 60 | 52-63 |
| REMCP-48-63 | PG 48 | 10 | 34.0-48.0 | 40 | 68 | 56-67 |
| NPT THREAD | ||||||
|---|---|---|---|---|---|---|
| Part Codes | Entry Thread M | Entry thread Length D (mm) | Clamping Range (mm) | Installation Torque (Nm) | Across Flat AF (mm) | Total Length C (mm) |
| REMCN-1/4 | NPT 1/4″ | 13 | 3.0-7.0 | 4 | 16 | 33-40 |
| REMCN-3/8 | NPT 3/8″ | 13 | 4.5-10.0 | 4 | 20 | 35-42 |
| REMCN-1/2 | NPT 1/2″ | 16 | 6.0-13.0 | 8 | 24 | 38-45 |
| REMCN-3/4 | NPT 3/4″ | 16 | 9.0-16.0 | 10 | 29 | 40-48 |
| REMCN-1 | NPT 1″ | 20 | 13.0-21.0 | 20 | 36 | 46-53 |
| REMCN-1 1/4 | NPT 1 1/4″ | 20 | 16.0-28.0 | 20 | 46 | 50-58 |
| REMCN-1 1/2 | NPT 1 1/2″ | 20 | 21.0-35.0 | 30 | 55 | 51-62 |
| REMCN-2 | NPT 2″ | 21 | 34.0-48.0 | 40 | 68 | 56-67 |
Brand
Raychem RPG
Be the first to review “Euro Series Cable Glands”
Reviews
There are no reviews yet.