suitable for determining the voltage without contacting, equipped with: 1 cable cutter scissors - 16020-F1, 1 voltage tester, voltage range: 50 - 600 VAC, 50 -...
cable cutter shears suitable for cutting copper cables and aluminum cables up to 35mm², high cutting performance, adjustable screw joint, 2-component handle,...
cable cutter shears suitable for cutting copper cables and aluminum cables up to 35mm², high cutting performance, adjustable screw joint, 2-component handle,...
for removing all insulation layers of cables with diameters from 25mm, cutting depth adjustable from 0-5 mm, replaceable double blade or turning blade, suitable...
Application range: Ø > 25 mm Insulation thickness: 0 - 5 mm Suggested application: PVC / Rubber Designed to strip outer sheath from MV and LV cables Longitudinal and circular cuts Designed to strip ends and or middle parts Stripping without hurting the lower layers Interchangeable two-sided blade Snap closure mechanism
for work under voltage 1000V, with the help of the adjusting screw the cutting depth of 0.5 - 5 mm insulation thickness can be adjusted. At the beginning of each longitudinal or round cut, the knife is guided by gently pressing the finger on the tab, the outer insulation is cut by small lever movements (> 90 °) and the…
area of application: Ø> 45 mm, insulation thickness: 0-5mm for insulation in PVC / PE / rubber and for stripping the outer sheath on large cable cross-sections (MS-HS), longitudinal and round cut, for removing the outer layer on GAS water pipes, for stripping of end and intermediate pieces, stripping process without damaging the layers underneath, replaceable blade, usable on both…
Application range: Ø 16 - 54 mm Insulation thickness: 0 - 5 mm Suggested application: Polyethylene / fully bonded Designed to strip aluminium armed outer sheaths of LV/MV Suitable for longitudinal and circular cutting Additional claw to break hard insulation The initial setting of the correct cable diameter is done by adjusting the handle The fixation of the device on…
Application range: Ø 16 - 54 mm Insulation thickness: 0 - 5 mm Suggested application: Polyethylene / fully bonded Designed to strip aluminium armed outer sheaths of LV/MV Suitable for longitudinal and circular cutting Additional claw to break hard insulation The initial setting of the correct cable diameter is done by adjusting the handle The fixation of the device on…
Fully insulated With round blade also suitable for stripping cables High cutting performance and service life Foldable blade guard integrated captively in the handle Ergonomic handle made of impact-resistant plastic
1000V insulated tools (IEC 60900, IEC900, VDE0682-201) Engineers pliers 180 mm 2K - 1101 180 Screwdriver for slotted head screws - 0,5 x 3 x 100 - 1301 030 Screwdriver for slotted head screws - 0,8 x 4 x 100 - SLIM - 1301 040 Screwdriver for slotted head screws - 1,2 x 6,5 x 150 - SLIM - 1301…
the cable knife AV3820 enables a precise, fast and safe stripping of all common round cables with a diameter between four and 28 millimeters. With the aid of an adjusting wheel in the housing, the cutting depth of the cutting blade can be infinitely adjusted. This prevents damage to the inner conductor. The cutting blade is self-rotating integrated in the…
Application range: Ø 16 - 54 mm Insulation thickness: 0,5 - 5 mm Suggested application: High density polyethylene Longitudinal and circular cuts on MV cables Used to work on live parts up to 1000V AC and 1500V DC Designed to strip ends or middle parts Hooked blade for removing the sheath that has been cut 100° tool rotation makes a…
AN Series – Basic expanders for small tubes (oil coolers, radiators). 800 / 800-5 Series – Standard tools for many condenser and heat exchanger tubes; the 5 series often have five rollers for more uniform expansion, especially on thin-walled tubes. 1200 / 1200-5 Series – Longer reach and better control for thicker tube sheets; 5 series usually mean five-roller, more…
CP700 – Compact Hydraulic Pump with Display: Categories: Battery operated pumps, Hydraulic pumps The CP700 is a portable, battery-operated hydraulic pump designed to operate cutting and crimping tools at pressures up to 700 bar. It features a compact, lightweight, and ergonomic design, making it easy to handle in industrial and field applications. It is equipped with a digital display that shows pressure,…
1000V insulated tools (IEC 60900, IEC900, VDE0682-201) Engineers pliers 180 mm 2K - 1101180 Screwdriver for slotted head screws - 0,5 x 3 x 100 -1301030 Screwdriver for slotted head screws - 0,8 x 4 x 100 - SLIM - 1301040 Screwdriver for Phillips screws PH 1 x 75 - PH 1 x 75 - SLIM - 13021 NOT insulated…
Equipment: 1000V insulated tools (IEC 60900, IEC900, VDE0682–201) Engineers pliers 180 mm 2K - 1201 180 Telephone pliers with straight jaws 160 mm 2K - 1203 160 Screwdriver for slotted head screws - 0,5 x 3 x 100 - 1301 030 Screwdriver for slotted head screws - 0,8 x 4 x 100 - SLIM - 1301 040 Screwdriver for slotted…
Maintenance Tips Regular lubrication of inner shaft Avoid sharp bending of cable Do not overload motor Check carbon brushes periodically Keep ventilation area clean Safety Precautions ⚠ Always wear safety goggles ⚠ Use correct RPM for each accessory ⚠ Secure workpiece properly ⚠ Avoid loose clothing near rotating parts
Technical characteristics: Rigid single pole: 10 mm² Flexible single pole: 2,5 - 4 - 6 mm² 20 mm stripping depth Blade built into the tool The tool can be used with one hand only and allow easy stripping of cables lenghts of 20 mm The tool is provided with two hand - guards. Central handling permits all stripping operations Blades…
Application range: 6 - 150 mm² Insulation thickness: Preadjusted stripping inserts Suggested application: ABC cables (overhead, twisted, insulated) Designed to work on live parts up to 1000V AC and 1500V DC Stripping depth adjustment built inside the handle Insulated handle with bayonet connection Stripping length adjustable from 20 to 80 mm Scale marked on the built-in device to display the…
Technical characteristics: Application range: Ø 16 - 41 mm Insulation thickness: 0 - 2 mm Suggested application: Non vulcanized, peelable semiconductive layer To strip the non-vulcanized semiconductive layer of MV cables Longitudinal, helical and circular cuts Positioned on the cable comparable to a vice system Stop clamp to limit the stripping length Gradually depth adjustment Maximal rotating diameter 130 mm…
10 pieces, for spirally cutting inner insulation layers of the HV cables (MS-only 20 kV), handle with adjustable stripping length, the plastic case contains 9...
Technical characteristics: Application range: Ø 15 - 52 mm Insulation thickness: 0 - 15 mm Suggested application: Any type of primary insulation Designed to remove the primary insulation of 6 to 45kV cables Helical and circular cuts Max. rotating diameter 220 mm Snap knob to activate/deactivate axial feed Positioned on the cable like a vice system Designed to strip both…
Perfect entry-level model: Strips solid, multi-stranded and finely stranded conductors from 0.2 to 6 mm² with standard insulation without any need for manual adjustment Fine adjustment enables precise setting of the cutting depth for special materials or temperature conditions With cable cutter for solid conductors up to 2.5 mm², extended cutting capacity for finely stranded conductors up to 6 mm²…
Application range: Ø 24 - 60 mm Insulation thickness: 0 - 5 mm Suggested application: Polyethylene / lead cables Designed to strip outer sheath from MV and LV cables Circular and helical cuts Operates by simply rotating it around the cable axis Designed to strip both ends Interchangeable blade
extra long blades made of high-strength special steel, corrosion protection of the blades, for cutting flexible conductors up to 16 mm² and medium-hard wire, gripping zone with 3 recesses for different cable diameters
for cutting flexible Al and Cu conductors up to 50 mm², high cutting performance with smallest dimensions, cutting inserts made of high-strength special steel, corrosion protection of the cutting edges
Key things operators watch: Proper torque (over-rolling can crack tubes) Tube material vs tube sheet material Expansion length and wall thinning Whether seal welding is also required
Types of Impact Sockets Standard (Shallow) Impact Socket – For normal bolts. Deep Impact Socket – For long bolts. Metric Impact Socket – Sizes in mm. SAE Impact Socket – Sizes in inches. 6-Point Socket – Better grip, most common. 12-Point Socket – Used where more angle flexibility is needed. Important Note : Using normal socket on impact wrench can…
Ratchet Type Torque Wrench – Used For A Ratchet Type Torque Wrench is used to tighten nuts and bolts to a specific and accurate torque value. ✅ Main Uses: 🚗 Automotive work – Engine assembly, wheel nuts, cylinder head bolts 🏭 Industrial machinery installation 🔩 Mechanical maintenance and repair 🛠️ Assembly of equipment and structures ✈️ Aerospace and heavy engineering…
continuous tightening without removing the tool from the fastener. Available in different drive sizes (3/8", 1/2", ¾” and 1” etc.). Used in automotive, mechanical, and industrial applications. ensures accurate and safe fastening in professional work.
Cable stripper AMS-MAXI without case Cable stripper IMS II FBS wire stripper UFS - tool for chamfered cuts of primary insulation Roller chains cutter 2x pressure spring RF5 Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Cable stripper AMS-MAXI without case Cable stripper IMS II UFS - tool for chamfered cuts of primary insulation HLS - cable stripper Stop clamp Roller chains cutter 2x pressure spring RF5 Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Equipped with: Cable stripper AMS-MAXI without case Cable stripper IMS II UFS - tool for chamfered cuts of primary insulation HLS - cable stripper Stop clamp Roller chains cutter 2x pressure spring RF5 Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
AIS - cable stripper Feed lever 14 pieces of 10 colored indication washers 2 spare screws to fasten the blade FBS - cable stripper IMS II - cable strippe Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Universal cable stripper - AMS IMS II - cable stripper FBS - cable stripper Cable knife Special electricians scissors Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Equipped with: AMX cable stripper Feed lever AMS cable stripper without case FBS wire stripper Cable stripper IMS II UFS - tool for chamfered cuts of primary insulation Tube of silicone grease 2,5 mm Allen wrench Rigid resin case
Equipped with: AIS - AIRBAG cable stripper Feed lever Blade fastening screws (spares) Set of spare blades with washers 2,5 mm Allen wrench Rigid resin case
Intercable is known for the development and production of high quality stripping tools in the field of low and medium voltage for various types of cables. Convince yourself of the large product range in the field of outer sheath, field limitation and inner sheath cutters. We also offer a wide range of set solutions.
Equipped with: AMS cable stripper without case AV6221 Cable stripper IMS II HLS - cable stripper Stop clamp AV6411 Tube of silicone grease FBS wire stripper UFS - tool for chamfered cuts of primary insulation 2,5 mm Allen wrench FBS wire stripper Rigid resin case
Technical characteristics: Application range: Ø 15 - 60 mm Suggested application: Any type of primary insulation Designed for chamfered cuts of primary insulation of MV cables (2 x 45°) Positioning on the cable with a clamp system Tool fitted with PTFE plates ensuring optimal sliding on the cable without the use of silicone paste Replaceable blade Rotation diameter max. 130…
