Medium Voltage Insulating Boots. Cold applied unscreened elastomeric insulating boots (in Silicon or EPDM) are moulded parts, fitted over the connection between a cable lug and inline or right-angled equipment bushing, to improve phase-to-phase and phase-to-ground insulation. They are used in switchgear and transformer cable boxes where the air clearances are insufficient for normal operation or protect against flashover due…
Providing electrical and mechanical protection, the gloves are available in bicolour from 500 VAC to 17500 V AC KAMFET Electrical Insulating Gloves protect people working on live voltages or in proximity of electrical installations from electrical shocks Used for a wide range of voltages from 500 V AC upto 17000 V AC Compliant with EN60903:2003, IEC60903:2014 and CE category III…
How They’re Used These mats are typically placed on the floor in front of electrical panels, switchboards, battery rooms, and other live installations so that anyone standing on them with the right PPE (insulated gloves/boots) has a layer of insulation between their body and ground, reducing shock risk.
Insulating rubber gloves are personal protective equipment (PPE) designed to protect workers from electrical shock when working with or near live electrical circuits. Made from high-quality, non-conductive rubber, these gloves are essential for electricians, linemen, and maintenance personnel operating in high-voltage environments.
Medium Voltage Insulating barriers. BCIC preformed covers provide connections for insulators, bushings and busbars. Customized covers can be made simply and economically by vacuum forming non-shrinkable sheet material. Installation is very simple often with no need to disconnect busbars. BCIC covers are held in place with UV-stabilized plastic nuts and bolts, rivets or tie-wraps, and can be easily removed for…
Medium Voltage Heat Shrink/ Fusion tapes. HVBT heat-shrinkable tape is ideal for use on complex shapes and where busbars cannot be disconnected. HVBT tape shrinks 30% longitudinally and an adhesive layer flows and seals the layers of tape during installation. As with the other components in the system, the adhesive does not bond to metalwork, allowing easy removal for inspection…
Ladder Type Cable ties with Pure Polyester coating, using ratchet mechanism. Ladder Type Cable Ties are designed with Ratchet Mechanism System. They are resistant to corrosion and suitable for indoor, outdoor or harsh environments.
Ladder Type Cable ties with metallic finish, using Ratchet Mechanism. Ladder Type Cable Ties are designed with Ratchet Mechanism System. These Cable Ties are resistant to corrosion and suitable for indoor, outdoor or harsh environments.
Leather over gloves/ protector worn over rubber gloves for protection against mechanical hazards Used with rubber insulating gloves to enhance mechanical protection Velcro at the cuffs adjust the tightness to the user's hand
Boltless low power loss C-Wedge Type Connectors used in Distribution and High Voltage Networks. AMPACT C-Wedge type Boltless Connectors used for same or different conductor combination or on solid rod equipment terminal connections. Consisting of 2 parts, C-Body and Wedge, it prevents degradation and achieves significantly lower resistance. Thermal cycling causes conductors to expand and contract, but the Connector C-Body…
Summary: Raychem Low Loss Boltless C-Wedge Connectors Boltless low power loss C-Wedge Type Connectors used in Distribution and High Voltage Networks. AMPACT C-Wedge type Boltless Connectors used for same or different conductor combination or on solid rod equipment terminal connections. Consisting of 2 parts, C-Body and Wedge, it prevents degradation and achieves significantly lower resistance. Thermal cycling causes conductors to…
